Autel Pulse Jet Valves

1.  Autel Pulse Jet Valves AE1475G225 valves are installed through the tank, refer to the appropriate template listed above.
2.  To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.
3.  Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.