400325-117 ASCO Pulse jet valve Coil
400325-117 400325117 400325-107 400325107 type 220VAC 110VAC solenoid coil for pulse jet valves can be used for SCG353A043,SCG353A044 type pulse valves.
Pulse Jet Valves
Showing 1–12 of 37 results
-
-
ASCO G353A045 Remote Pilot Solenoid Valve
● Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix ‘V’
for identification
● Sequential controller for pilot solenoid valves
● Pilot boxes containing 2 to 12 pilot solenoid valves
● Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and
national standards -
ASCO G353A045 Remote Pilot Solenoid Valve
ASCO G353A045 G1 1/2″ Remote pilot threaded body Pulse valve.
-
ASCO G353A046 Pulse Jet Valves
1/2″ G353A046 ASCO dual stage Remote Control Pulse Jet Valve Right angle pulse valve.
-
ASCO SCG353A043 SCG353A044 Air Pulse Valve
• The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation
• The high flow, angle type bodies, springless construction, in combination with the special diaphragm assemblies give the unique operating features required for dust collector service applications
• The design with integral compression fittings will facilitate installation because there is no need for threaded piping -
ASCO SCG353A047 1.5 Inch Pulse Jet Valves 24VDC
The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation.
-
ASCO SCG353A050 Diaphragm Pulse Jet Valve
The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation.
-
ASCO SCG353A050 Pulse Jet Solenoid Valve
• The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation
• The high flow, angle type bodies in combination with the special main diaphragm assemblies give theunique operating features required for dust collector service applications
• The design with integral compression fittings will facilitate installation because there is no need for threaded piping -
ASCO SCXE353.060 SCR353G060 Dust Collector Pulse Jet Valve
Dust collector applications, in particular for reverse pulse jet filter cleaning and its variations, including bag filters, cartridge filters and envelope filters, ceramic filters and sintered metal fibre filters.
-
ASCO SCXE353A061 pulse jet valve
ASCO SCXE353A061 pulse jet valve environmental bag filter solenoid valve diaphragm kit.
-
Autel AE1475G225 G3″ Pulse Jet Valves
Autel Pulse Jet Valves AE1475G225 valves are installed through the tank, refer to the appropriate template listed above.
-
Autel AE1475G225 Pulse Jet Valves
1. Autel Pulse Jet Valves AE1475G225 valves are installed through the tank, refer to the appropriate template listed above.
2. To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.